OceanSphereWORK
OceanSphere Work

Your service job, documented before you leave the ship.

Log your hours, add photos, and get an invoice-ready service report as a clean PDF. Plus AI troubleshooting and a free library of 187,244 equipment models.

Daily ReportFinal
CaseCylinder head overhaul, unit 3
StatusIn progress
Customer—
VesselBulk carrier, 2019
TypeFromToBreakNetPerson
Work07:0020:0060 min12:00 hJ. K.
Total12:00 h
On board, not on paper

The screens behind the job.

Three real product screens, not feature labels — this is what a technician actually sees.

Technician's hands working a shaft on a bench grinder
Case · Day log
TypeNet
Work8:00 h
Travel to site1:30 h
Notes
Unit 3 head lifted, seats lapped
Valve clearances reset, cold
Parts used
Cylinder head gasket1
Exhaust valve seat insert2
01

Log the job on board

Hours, photos and notes stay attached to the job while the technician is still on the vessel.

Auxiliary engine cylinder heads opened for overhaul
Daily Report · PDF
Cylinder head overhaul, unit 3
Vessel Bulk carrier, 2019Equipment Auxiliary engine, 6 cyl.Day 2 of 3Technician J. K.
Hours
TypeFromToBreakNet
Travel to site05:3007:00–1:30 h
Work07:0020:0060 min12:00 h
Total13:30 h
Work performed
Cylinder head unit 3 lifted, valve seats inspected and lapped
Two exhaust valve seat inserts renewed, valves ground in
Head refitted with new gasket, bolts tensioned in three stages
Valve clearances set cold per maker's table, engine test-run at load
Parts used
PartQtySource
Cylinder head gasket1Ship's stock
Exhaust valve seat insert2Brought by technician
O-ring set, cooling water jacket1Ship's stock
Photos
Technician
Chief Engineer
OceanSphere Work · Daily reportPage 1 of 2
02

Report ready before you leave

Mark the photos, and the daily or final report becomes a clean PDF — customer, vessel and hours already filled in.

Technician on deck working near a mooring winch
AI Troubleshooter
After the overhaul, exhaust temperature on unit 3 runs about 40 °C above the other cylinders. Where do I start?
Three checks, in this order:
  1. Fuel side: compare the pump index of unit 3 with the others and check the injector for late opening or a dripping nozzle. A dripping nozzle raises exhaust temperature first.
  2. Exhaust valve: re-check the cold clearance and look for seat leakage. A valve that does not close fully shows high exhaust temperature with lower peak pressure.
  3. Exhaust path: inspect the flange and exhaust port of unit 3 for a gas leak or partial blockage.
Based on: day log, photos 1–3, uploaded engine manual (valve section)
Create a parts order listTorque values for the head bolts?Draft the customer summary
03

Ask the troubleshooter

Drop in a PDF, email, or photo. Get a 10-section technical report and chat as a marine engineer. Multi-lingual.

Two ways in

Choose your path.

OceanSphere Work serves two distinct user groups — pick the one that fits your role.

For marine service companies

Equipment Library, AI Troubleshooting, Field Service dispatch, and Document Hub — the full operational suite for service teams, surveyors, and engineers.

Case list
Cylinder head overhaul, unit 3Open
Bulk carrier, 2019Field Service
Log inStart free

For shipowners & ship managers

Fleet DMS: ISM documents with revision control, QHSE, internal & external reports, and certificate tracking with expiry alerts — all scoped to your fleet.

Certificate tracking
Safety Management CertificateValid
Class CertificateValid
Shipowner Log inRegister your fleet
In three steps

What a technician actually does.

One case carries everything: the technician logs on board, the office gets a report it can invoice. No retyping, no hunting for photos in chat groups.

01

Open a service case

Add the vessel, describe the job.

New case
VesselBulk carrier, 2019
JobCylinder head overhaul, unit 3
02

Daily report with photos

Log hours, attach photos, keep notes — one entry per day.

Day 2 · entry
Work 07:00–20:0012:00 h
Photos · Notes3 · 2
03

Invoice-ready timesheet PDF

Mark the photos, generate the PDF, done before leaving the vessel.

Export
Daily reportPDF · 2 pages
StatusFinal
Everything around the job

One case file. Nineteen modules.

The three screens above are the daily routine. Around them sits everything a service company needs to plan, record, report and run the business, all in the same case file.

Plan

  • TechniciansProfiles, documents and certificates, day and hour rates.
  • Assignments & briefingsAssign technicians per case, plan trips and port calls.
  • Mission overviewEvery case across the company, filtered by status.
  • TravelSearch flights, build a travel quote, send and book.
See the screens

Record

  • VesselsRegister with automatic lookup by name or IMO.
  • Customers & contactsWho ordered, who signs, who receives the report.
  • Equipment registerEquipment per vessel, with CSV export.
  • Field appTime and photos from the phone, installs like an app.
  • Incident casesFault reports on the fleet side with their own case list.
See the screens

Report

  • Daily & final reportsHours, photos and notes become a PDF.
  • Report templatesYour own branding and forms, one template per customer if you like.
  • Service report builderMeasurements, class limits, export to Word.
  • CertificatesUpload, automatic extraction, review, expiry alerts.
  • Customer portalCustomers see their own vessels and reports.
See the screens

Run

  • DashboardCase status, upcoming travel, expiring certificates.
  • AnalyticsRevenue from tracked hours and rates, per case and per vessel.
  • Vendor quote comparisonUpload several offers, line items extracted and compared side by side.
  • Roles & seatsInvite colleagues with their role, admin or engineer.
  • Fleet documentsISM documents with revision control and search.
See the screens
4Work areas
14 daysfull trial, ends automatically
6Languages
Pricing

Plans & Pricing

Start free. Upgrade whenever you need more modules. Cancel any time.

Starter
Equipment Library only — free forever
€0
Free forever
  • ✓ Equipment Library
Engineer
For single engineers and surveyors
€49/month
or €490/year (2 months free)
  • ✓ Equipment Library
  • ✓ AI Troubleshooter
  • ✓ Checklists & Certificates
Service Pro
For small service companies
€99/month
or €990/year (2 months free)
  • ✓ Equipment Library
  • ✓ AI Troubleshooter
  • ✓ Document Hub
  • ✓ Checklists & Certificates
Field Service
Full field service operations
€199/month
or €1990/year (2 months free)
  • ✓ Field Service Ops
  • ✓ Document Hub
  • ✓ AI Troubleshooter
Enterprise
All modules, priority support
€375/month
or €3750/year (2 months free)
  • ✓ All modules, priority support
Shipowner
Fleet document management for owners
€149/month
or €1490/year (2 months free)
  • ✓ Fleet DMS

See pricing →

No credit card required

Start a 14-day free trial.

Full trial, ends automatically. Or start with the free Equipment Library and add modules as your needs grow.

Frequently asked

Three things people ask first.

Do I need a credit card for the trial?

No. The 14-day trial starts without a credit card and ends automatically — nothing is charged if you do not choose a plan.

Is the equipment library really free?

Yes. 187,244 equipment models are free to browse without an account, on Work or directly in the library.

What if I only need the library, not the full product?

Then just use it — the library is free and open on its own. Work is there when you also want reports, dispatch or fleet documents.